Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance

Linshi Guo; Wei Zhao; Nobuyuki Gomi; Jingchao Guan; Xilu Zhao

doi:doi:10.11648/j.ijmea.20221006.11

| Peer-Reviewed

Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance

Linshi Guo, Wei Zhao, Nobuyuki Gomi, Jingchao Guan, Xilu Zhao

Published in International Journal of Mechanical Engineering and Applications (Volume 10, Issue 6)

Received: 9 October 2022 Accepted: 28 October 2022 Published: 4 November 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Improving the efficiency of vibration power generation is an important research topic. Therefore, it is effective to develop a vibration power generation system using a bistable vibration model. The bistable vibration model considered in previous studies has the problem that the center of gravity is high and the vibration power generation efficiency is relatively low. In this study, we propose a horizontally opposed mass-spring type bi-stable vibration energy harvesting system that can be applied to low spaces. A bi-stable vibration system is built using horizontally opposed elastic springs and mass blocks. An elastic composite beam is constructed from an elastic bending plate and spring, and vibration power is generated using a piezoelectric element. An equation of motion is established accounting for the elastic composite beam, and a numerical analysis method based on the Runge-Kutta method is proposed. A formula for predicting the periodic excitation frequency at which stochastic resonance is most likely to occur is derived. A bi-stable vibration energy harvesting experimental device using a piezoelectric element is fabricated, and the proposed numerical analysis method and periodic excitation frequency prediction formula are validated. The amplitude increases and vibration power generation performance due to stochastic resonance are confirmed. In the verification experiment, it was confirmed that the vibration amplitude was expanded more than 7 times and the power generation amount increased by 21%.

Published in	International Journal of Mechanical Engineering and Applications (Volume 10, Issue 6)
DOI	10.11648/j.ijmea.20221006.11
Page(s)	123-134
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Ambient Energy, Bi-Stable Vibration System, Piezoelectric Element, Stochastic Resonance, Vibration Energy Harvesting

References

[1]	Priya, S., Song, H., Zhou, Y., Varghese, R., Chopra, A., Kim, S., Kanno, I., Wu, L., Ha, D. S., Ryu J., & Polcawich R. D. (2017). A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits. Energy Harvesting and Systems, 4 (1), 791-796. doi:org/10.1515/ehs-2016-0028.
[2]	Zhang, H., Corr, L. R., & Ma, T. (2018). Issues in vibration energy harvesting. Journal of Sound and Vibration, 421 (12), 79-90. doi:org/10.1016/j.jsv.2018.01.057.
[3]	Jiang, J., Liu, S., Feng, L., & Zhao, D. (2021). A Review of Piezoelectric Vibration Energy Harvesting with Magnetic Coupling Based on Different Structural Characteristics. Micromachines, 12 (4), 436. doi:org/10.3390/mi12040436.
[4]	Stephen, N. G. (2006). On energy harvesting from ambient vibration. Journal of Sound and Vibration, 293 (1), 409-425. doi:org/10.1016/j.jsv.2005.10.003.
[5]	Khan, F., & Ahmad, I. (2016). Review of Energy Harvesters Utilizing Bridge Vibrations. Shock and Vibration, 2016, 1340402. doi:org/10.1155/2016/1340402.
[6]	Lallart, M., Anton, S. R., & Inman, D. J. (2010). Frequency Self-tuning Scheme for Broadband Vibration Energy Harvesting. Journal of Intelligent Material Systems and Structures, 21 (9), 897-906. doi:org/10.1177/1045389X10369716.
[7]	Kubba, A. E., & Jiang, K. (2014). Efficiency Enhancement of a Cantilever-Based Vibration Energy Harvester. Sensors, 14 (1), 188-211. doi:org/10.3390/s140100188.
[8]	Dong, L., Grissom, M. & Fisher, F. T. (2015). Resonant frequency of mass-loaded membranes for vibration energy harvesting applications. AIMS Energy, 3 (3), 344-359. doi: 10.3934/energy.2015.3.344.
[9]	Chen, Z., He, J. & Wang, G. (2019). Vibration Bandgaps of Piezoelectric Metamaterial Plate with Local Resonators for Vibration Energy Harvesting. Shock and Vibration, 2019, 1397123. doi:org/10.1155/2019/1397123.
[10]	Dai, X. (2016). An vibration energy harvester with broadband and frequency-doubling characteristics based on rotary pendulums. Sensors and Actuators A: Physical, 241, 161-168. doi: org/10.1016/j.sna.2016.02.004.
[11]	Yang, W. & Towfighian, S. (2017). A hybrid nonlinear vibration energy harvester. Mechanical Systems and Signal Processing, 90, 317-333. doi: org/10.1016/j.ymssp.2016.12.032.
[12]	Gafforelli, G., Corigliano, R., Xu, R., & Kim, S. (2014). Stochastic averaging of energy harvesting systems. Applied Physics Letters, 105, 203901. doi:org/10.1063/1.4902116.
[13]	Gammaitoni, L., Neri, I., & Vocca, H. (2009). Nonlinear oscillators for vibration energy harvesting. Applied Physics Letters, 94, 164102. doi:org/10.1063/1.3120279.
[14]	Jiang, W., & Chen, L. (2016). Stochastic averaging of energy harvesting systems. International Journal of Non-Linear Mechanics, 85, 174-187. doi: org/10.1016/j.ijnonlinmec.2016.07.002.
[15]	McInnes, C. R., Gorman, D. G., & Cartmell, M. P. (2008). Enhanced Vibrational Energy Harvesting using Nonlinear Stochastic Resonance. Journal of Sound and Vibration, 318 (4), 655-662. doi: org/10.1016/j.jsv.2008.07.017.
[16]	Gammaitoni, L., Hanggi, P., Jung, P., & Marchesoni, F. (1999). Stochastic resonance. Reviews of Modern Physics, 70, 223-287. doi:org/10.1103/RevModPhys.70.223.
[17]	McNamara, B., & Wiesenfeld, K. (1989). Theory of stochastic resonance. Physical Review A, 39 (9), 4854-4869. doi:org/10.1103/PhysRevA.39.4854.
[18]	Tretyakov, M. V. (1998). Numerical technique for studying stochastic resonance. Physical Review E, 57 (4), 4789-4794. doi:org/10.1103/PhysRevE.57.4789.
[19]	Harne, R. L. & Wang, K. W. (2013). A review of the recent research on vibration energy harvesting via bistable systems. Smart Materials and Structures, 22, 023001. doi: 10.1088/0964-1726/22/2/023001.
[20]	Pellegrini, S. P., Tolou, N., Schenk, M., & Herder, J. L. (2012). Bistable vibration energy harvesters: A review. Journal of Intelligent Material Systems and Structures, 24 (11), 1303-1312. doi:org/10.1177/1045389X12444940.
[21]	Zheng, R., Nakano, K., Hu, H., Su, D. & Matthew, P. C. (2014). An Application of Stochastic Resonance for Energy Harvesting in a Bistable Vibrating System. Journal of Sound and Vibration, 333 (12), 2568-2587. doi:org/10.1016/j.jsv.2014.01.020.
[22]	Zhang, Y., Zheng, R., Kaizuka, T., Su, D. & Nakano, K. (2015). Broadband vibration energy harvesting by application of stochastic resonance from rotational environments. The European Physical Journal Special Topics, 224, 2687-2701. doi: 10.1140/epjst/e2015-02583-7.
[23]	Zuo, L., & Tang, X. (2013). Large-scale vibration energy harvesting. Journal of Intelligent Material Systems and Structures, 21 (11), 1405-1430. doi:org/10.1177/1045389X13486707.
[24]	Zhao, W., Wu, Q., Zhao, X., Nakano, K., & Zheng, R. (2020). Development of large-scale bistable motion system for energy harvesting by application of stochastic resonance. Journal of Sound and Vibration, 473, 115213. doi: org/10.1016/j.jsv.2020.115213.
[25]	Beer, F. B., Johnston, E. R., Deworf, J. T., & Mazurek, D. F. (2012). Mechanics of materials. McGraw Hill, 233-236.

Cite This Article

Plain Text BibTeX RIS

APA Style

Linshi Guo, Wei Zhao, Nobuyuki Gomi, Jingchao Guan, Xilu Zhao. (2022). Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. International Journal of Mechanical Engineering and Applications, 10(6), 123-134. https://doi.org/10.11648/j.ijmea.20221006.11

Copy | Download

ACS Style

Linshi Guo; Wei Zhao; Nobuyuki Gomi; Jingchao Guan; Xilu Zhao. Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. Int. J. Mech. Eng. Appl. 2022, 10(6), 123-134. doi: 10.11648/j.ijmea.20221006.11

Copy | Download

AMA Style

Linshi Guo, Wei Zhao, Nobuyuki Gomi, Jingchao Guan, Xilu Zhao. Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. Int J Mech Eng Appl. 2022;10(6):123-134. doi: 10.11648/j.ijmea.20221006.11

Copy | Download

@article{10.11648/j.ijmea.20221006.11,
  author = {Linshi Guo and Wei Zhao and Nobuyuki Gomi and Jingchao Guan and Xilu Zhao},
  title = {Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {10},
  number = {6},
  pages = {123-134},
  doi = {10.11648/j.ijmea.20221006.11},
  url = {https://doi.org/10.11648/j.ijmea.20221006.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20221006.11},
  abstract = {Improving the efficiency of vibration power generation is an important research topic. Therefore, it is effective to develop a vibration power generation system using a bistable vibration model. The bistable vibration model considered in previous studies has the problem that the center of gravity is high and the vibration power generation efficiency is relatively low. In this study, we propose a horizontally opposed mass-spring type bi-stable vibration energy harvesting system that can be applied to low spaces. A bi-stable vibration system is built using horizontally opposed elastic springs and mass blocks. An elastic composite beam is constructed from an elastic bending plate and spring, and vibration power is generated using a piezoelectric element. An equation of motion is established accounting for the elastic composite beam, and a numerical analysis method based on the Runge-Kutta method is proposed. A formula for predicting the periodic excitation frequency at which stochastic resonance is most likely to occur is derived. A bi-stable vibration energy harvesting experimental device using a piezoelectric element is fabricated, and the proposed numerical analysis method and periodic excitation frequency prediction formula are validated. The amplitude increases and vibration power generation performance due to stochastic resonance are confirmed. In the verification experiment, it was confirmed that the vibration amplitude was expanded more than 7 times and the power generation amount increased by 21%.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance
AU  - Linshi Guo
AU  - Wei Zhao
AU  - Nobuyuki Gomi
AU  - Jingchao Guan
AU  - Xilu Zhao
Y1  - 2022/11/04
PY  - 2022
N1  - https://doi.org/10.11648/j.ijmea.20221006.11
DO  - 10.11648/j.ijmea.20221006.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 123
EP  - 134
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20221006.11
AB  - Improving the efficiency of vibration power generation is an important research topic. Therefore, it is effective to develop a vibration power generation system using a bistable vibration model. The bistable vibration model considered in previous studies has the problem that the center of gravity is high and the vibration power generation efficiency is relatively low. In this study, we propose a horizontally opposed mass-spring type bi-stable vibration energy harvesting system that can be applied to low spaces. A bi-stable vibration system is built using horizontally opposed elastic springs and mass blocks. An elastic composite beam is constructed from an elastic bending plate and spring, and vibration power is generated using a piezoelectric element. An equation of motion is established accounting for the elastic composite beam, and a numerical analysis method based on the Runge-Kutta method is proposed. A formula for predicting the periodic excitation frequency at which stochastic resonance is most likely to occur is derived. A bi-stable vibration energy harvesting experimental device using a piezoelectric element is fabricated, and the proposed numerical analysis method and periodic excitation frequency prediction formula are validated. The amplitude increases and vibration power generation performance due to stochastic resonance are confirmed. In the verification experiment, it was confirmed that the vibration amplitude was expanded more than 7 times and the power generation amount increased by 21%.
VL  - 10
IS  - 6
ER  -

Copy | Download

Author Information

Linshi Guo

Department of Mechanical Engineering, Saitama Institute of Technology, Saitama, Japan
Wei Zhao

Weichai Global Axis Technology Co., Ltd., Tokyo, Japan
Nobuyuki Gomi

Department of Mechanical Engineering, Saitama Institute of Technology, Saitama, Japan
Jingchao Guan

Department of Mechanical Engineering, Saitama Institute of Technology, Saitama, Japan
Xilu Zhao

Department of Mechanical Engineering, Saitama Institute of Technology, Saitama, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Linshi Guo, Wei Zhao, Nobuyuki Gomi, Jingchao Guan, Xilu Zhao. (2022). Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. International Journal of Mechanical Engineering and Applications, 10(6), 123-134. https://doi.org/10.11648/j.ijmea.20221006.11

Copy | Download

ACS Style

Linshi Guo; Wei Zhao; Nobuyuki Gomi; Jingchao Guan; Xilu Zhao. Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. Int. J. Mech. Eng. Appl. 2022, 10(6), 123-134. doi: 10.11648/j.ijmea.20221006.11

Copy | Download

AMA Style

Linshi Guo, Wei Zhao, Nobuyuki Gomi, Jingchao Guan, Xilu Zhao. Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance. Int J Mech Eng Appl. 2022;10(6):123-134. doi: 10.11648/j.ijmea.20221006.11

Copy | Download

@article{10.11648/j.ijmea.20221006.11,
  author = {Linshi Guo and Wei Zhao and Nobuyuki Gomi and Jingchao Guan and Xilu Zhao},
  title = {Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {10},
  number = {6},
  pages = {123-134},
  doi = {10.11648/j.ijmea.20221006.11},
  url = {https://doi.org/10.11648/j.ijmea.20221006.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20221006.11},
  abstract = {Improving the efficiency of vibration power generation is an important research topic. Therefore, it is effective to develop a vibration power generation system using a bistable vibration model. The bistable vibration model considered in previous studies has the problem that the center of gravity is high and the vibration power generation efficiency is relatively low. In this study, we propose a horizontally opposed mass-spring type bi-stable vibration energy harvesting system that can be applied to low spaces. A bi-stable vibration system is built using horizontally opposed elastic springs and mass blocks. An elastic composite beam is constructed from an elastic bending plate and spring, and vibration power is generated using a piezoelectric element. An equation of motion is established accounting for the elastic composite beam, and a numerical analysis method based on the Runge-Kutta method is proposed. A formula for predicting the periodic excitation frequency at which stochastic resonance is most likely to occur is derived. A bi-stable vibration energy harvesting experimental device using a piezoelectric element is fabricated, and the proposed numerical analysis method and periodic excitation frequency prediction formula are validated. The amplitude increases and vibration power generation performance due to stochastic resonance are confirmed. In the verification experiment, it was confirmed that the vibration amplitude was expanded more than 7 times and the power generation amount increased by 21%.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Development of an Opposed Mass-Spring Type Bi-Stable Vibration Energy Harvesting System Using Stochastic Resonance
AU  - Linshi Guo
AU  - Wei Zhao
AU  - Nobuyuki Gomi
AU  - Jingchao Guan
AU  - Xilu Zhao
Y1  - 2022/11/04
PY  - 2022
N1  - https://doi.org/10.11648/j.ijmea.20221006.11
DO  - 10.11648/j.ijmea.20221006.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 123
EP  - 134
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20221006.11
AB  - Improving the efficiency of vibration power generation is an important research topic. Therefore, it is effective to develop a vibration power generation system using a bistable vibration model. The bistable vibration model considered in previous studies has the problem that the center of gravity is high and the vibration power generation efficiency is relatively low. In this study, we propose a horizontally opposed mass-spring type bi-stable vibration energy harvesting system that can be applied to low spaces. A bi-stable vibration system is built using horizontally opposed elastic springs and mass blocks. An elastic composite beam is constructed from an elastic bending plate and spring, and vibration power is generated using a piezoelectric element. An equation of motion is established accounting for the elastic composite beam, and a numerical analysis method based on the Runge-Kutta method is proposed. A formula for predicting the periodic excitation frequency at which stochastic resonance is most likely to occur is derived. A bi-stable vibration energy harvesting experimental device using a piezoelectric element is fabricated, and the proposed numerical analysis method and periodic excitation frequency prediction formula are validated. The amplitude increases and vibration power generation performance due to stochastic resonance are confirmed. In the verification experiment, it was confirmed that the vibration amplitude was expanded more than 7 times and the power generation amount increased by 21%.
VL  - 10
IS  - 6
ER  -

Copy | Download