Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers

Aya Abe; Ichiro Hagiwara; Yang Yang; Chie Nara

doi:doi:10.11648/j.ijmea.20221006.13

| Peer-Reviewed

Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers

Aya Abe, Ichiro Hagiwara, Yang Yang, Chie Nara

Published in International Journal of Mechanical Engineering and Applications (Volume 10, Issue 6)

Received: 2 November 2022 Accepted: 21 November 2022 Published: 29 November 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Producing industrial goods with origami structure, such as cans or bottles which can be folded neatly after drinking up, is an idea anyone could easily think of. However, this idea has not been put in practical use yet. Recently, Tachi-Miura polyhedron (TMP) is gaining attention as a 3-dimensional version of Miura-Ori. Meanwhile, Nojima Polyhedron (NP) has been found to be similar as TMP and it is considered that both are able to be analyzed from the point of pairing origami structures proposed by Nojima. The pairing origami is generated by sticking the symmetry 2-dimensional parts to each other to create 3-dimensional shapes. In this study, NP and TMP are focused on and the possibility of the idea is examined. NP which is a mirror symmetry structure and TMP which is a glide symmetry structure, both can be folded not only in the axial but also in the radial direction, and so it would be convenient if they can be applied to beverage containers. In this study, whether both structures are rigid folding or not is investigated geometrically, and then how this gives influence on the energy absorbing characteristics is considered quantically. In the generation of the model, since NP is not rigid folding, a model with accurate coordinates cannot be established because deformation occurs on the surface at the folding stage, so the coordinates are determined by approximation. On the other hand, in the case of TMP, the coordinates of each point can be accurately indicated by parameters, so a model with accurate coordinates is established. Moreover, an engineering possibility to apply both structures in beverage containers is explored by studying their crushing characteristics on simulation. As a result, whether a rigid folding or not has some influence on its deformation mode, however it is shown that it has no influence on the purpose to investigate its possibility for industrialization. This is the first step to make sure the effective usages of the foldable pairing origami structure.

Published in	International Journal of Mechanical Engineering and Applications (Volume 10, Issue 6)
DOI	10.11648/j.ijmea.20221006.13
Page(s)	144-159
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Origami Engineering, Energy Absorption Property, Rigid Folding, 4 Folding Lines Type, 6 Folding Lines Type, Reversed Spiral Origami Structure, Nojima Polyhedron, Tachi-Miura Polyhedron

References

[1]	Tokura, S., & Hagiwara, I. (2010). Forming Process Simulation of Truss Core Panel, Journal of Computational Science and Technology, 4 (1), 25-35 (Release Date: March 30, 2010).
[2]	Tokura, S., & Hagiwara, I. (2010). A Study for the Influence of Work Hardening on Bending Stiffness of Truss Core Panel, J. Appl. Mech., 77/031010-1-031010-6(2010-5).
[3]	Tokura, S., & Hagiwara, I. (2011). Shape Optimization to Improve Impact Energy Absorption Ability of Truss Core Panel, Journal of Computational Science and Technology, 5 (1), 1-12, (2011-1).
[4]	Hedgepeth, J. M. (1989). Structures for remotely deployable precision antenna, NASA Contract Report, 182065.
[5]	Guest, S. D., & Pellegrino, S. (1992). In extensional wrapping of flat membranes, First International Conference on Structural Morphology, Montpellier, R. Motro and T. Wester, eds., 203-215.
[6]	Sogame, A., & Furuya, H. (2000). Conceptual study on cylindrical deployable space structures, Deployable Structures: Theory and Applications, S. Pellegrino and S. D. Guest (Eds.), Kluwer Academic Publishers, SMIA 80, 383-392.
[7]	Shirasawa, Y., Mori, O., & Miyazaki, Y. (2012). Evaluation of membrane dynamics of IKAROS based on flight result and simulation using multi-particle model, Transactions of the Japan Society for Aeronautical and Space Sciences 10 (ists28) Po_4_21 - Po_4_26.
[8]	Morgan, J., Magleby, S. P., & Howell, L. L. (2016). An approach to designing origami-adapted aerospace mechanisms, Journal of Mechanical Design, 138 (5). doi: 10.1115/1.4032973.
[9]	W, S., Ze, Q., Dai, J., Udipi, N., Paulino, G. H., & Zhao, R. (2021). Stretchable origami robotic arm with omnidirectional bending and twisting, PNAS, 118, 2110023118.
[10]	Hanna, B. H., Lund, J. M., Lang, R. J., Magleby, S. P., & Howell, L. L. (2014), Waterbomb base: a symmetric single-vertex bistable origami mechanism, Smart Materials and Structures, 23, 094009.
[11]	Yasuda, H., Tachi, T., Lee, M., & Yang, J. (2017), Origami-based tunable truss structures for non-volatile mechanical memory operations, Nature Communications, 8, 962.
[12]	Xiang, X. M., Lu, G., & You, Z. (2020), Review /Energy absorption of origami inspired structures and materials, Thin-Walled Structures, 157, December 2020, 107130.
[13]	Song, J., Chen, Y., & Lu, G. (2012), Axial crushing of thin-walled structures with origami patterns. Thin-Walled Structures, 54: 65-71.
[14]	Ma, J., & You, Z. (2013), Energy absorption of thin-walled square tubes with a pre-folded origami pattern-part i: geometry and numerical simulation, Journal of Applied Mechanics, 81: 011003--11.
[15]	Garrett, D., You, Z., & Gattas, J. M. (2016), Curved crease tube structures as an energy absorbing crash box, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Charlotte, North Carolina.
[16]	Ma, J., Hou, D., Chen, Y., & You, Z. (2016), Quasi-static axial crushing of thin-walled tubes with a kite-shape rigid origami pattern, Numerical simulation, Thin-Walled Structures. 100: 38-47.
[17]	Wang, B., & Zhou, C. (2017), The imperfection-sensitivity of origami crash boxes. International Journal of Mechanical Sciences, 121: 58-66.
[18]	Zhou, C., Zhou, Y., Wang, B. (2017), Crashworthiness design for trapezoid origami crash boxes. Thin-Walled Structures, 117, 257-67.
[19]	Yang, K., Xu, S., Shen J, Zhou, S., & Xie, Y. M. (2016), Energy absorption of thin-walled tubes with pre-folded origami patterns Numerical simulation and experimental verification, Thin-Walled Structures, 103, 33-44.
[20]	Yang, K., Xu, S., Zhou, S., & Xie, Y. M. (2018), Multi objective optimization of multi-cell tubes with origami patterns for energy absorption, Thin-Walled Structures, 123, 100-13.
[21]	Hagiwara, I. & Nadayosi, S. (2003), Folding Process of Cylindrical Structures Using Origami Model, International Journal of Automotive Engineering, 34 (4), 145-149 (in Japanese).
[22]	Hagiwara, I., Yamamoto, C., Tao, X. & Nojima, T. (2004), Optimization for crush characteristics of cylindrical origami structure using reversed spiral model, Transactions of the Japan Society of Mechanical Engineers, Series A, 70 (689), 36-42 (in Japanese).
[23]	Wu, Z., Hagiwara, I., & Tao, X. (2007), Optimization of crush characteristics of the cylindrical origami structure, Int. J. Vehicle Design, 43 (1-4), 66-81.
[24]	Zhao, X., Kong, C., Yang, Y., and Hagiwara, I. (2021), Reversed torsion-type crush energy absorption structure and its inexpensive partial-heating torsion manufacturing method based on origami engineering, Journal of Manufacturing Science and Engineering. doi: 10.1115/1.4052438.
[25]	Nojima, T. (2000), Modelling of folding patterns in flat membranes and cylinders by using origami, Transactions of the Japan Society of Mechanical Engineers, Series C, 66 (643), 1050-1056 (in Japanese).
[26]	Kamata, Y., Itoh, K., Kawamura, T., Honda, T., Matsugi, Y., & Ishimura, T. (2012), Development of easily folded up PET bottle, Transactions of the Japan Society of Mechanical Engineers, Series C, 78 (789), 456-466 (in Japanese).
[27]	Ario, I. (2011), Cylindrical container and its manufacturing method, Patent number 4769976 (in Japanese).
[28]	Hagiwara, I., Nara, C., & Yang, Y. (2022), Development of new foldable polyethylene terephthalate bottles, Journal of Advanced Simulation in Science and Engineering (JASSE), 9 (2), 158-177.
[29]	Sugiyama, F. (2016), Pairing origami for manufacturing, Journal of Japan Society of Mechanical Engineers, 119 (1175), 14-15 (in Japanese).
[30]	Nojima, T. (2015), 3D Origami for Monozukuri Proposal of Pairing Origami, Nippon Origami Association. ISBN: 978-4-86540-040-3 (in Japanese).
[31]	Miura, K., & Tachi, T. (2010), Synthesis of rigid-foldable cylindrical polyhedral, Journal of the International Society for the Interdisciplinary Study of Symmetry, Symmetry: Art and Science, 204-213.
[32]	Yang, Y., Savchenko, M., Nara, C., & Hagiwara, I. (2016), Investigation for industrialization of the Nojima's pairing origami structure, DETC2016-59415, V05BT07A009. doi: 10.1115/DETC2016-59415.
[33]	Yang, Y., Nara, C. & Hagiwara, I. (2017), Energy absorption characteristics of pairing origami structure, papers of the Japan Society of Mechanical Engineers, 83 (845) (in Japanese).
[34]	Hallquist, J. O. (2007), LS-DYNA keyword user’s manual, LSTC (2007).
[35]	Belytschko, T. & C. S. Tsay (1984), Explicit algorithms for the nonlinear dynamics of shells, Computer Methods in Applied Mechanics and Engineering, Vol. 43, pp. 251-276.
[36]	Tsuda, M. & Hagiwara, I. (1998), Dynamic-explicit finite element analysis methods for large-deformation quasi-static problems, Transactions of the Japan Society of Mechanical Engineers, Series A, 64 (622), 1548-1555 (in Japanese).
[37]	Kitagawa, Y., Hagiwara, I. & Tsuda, M. (1991), Dynamic analysis of thin-walled columns with arbitrary section geometry subjected to axial crushing, Transactions of the Japan Society of Mechanical Engineers, Series A, 57 (537), 1135-1139 (in Japanese).
[38]	Kitagawa, Y., Hagiwara, I. &Tsuda, M. (1992), Development of a collapse mode control method for side members in vehicle collisions, SAE 910809 1991 Transaction Section 6, 1101-1107.
[39]	Hagiwara, I., Tsuda, M., Kitagawa, Y. & Futamata, T. (1991), Method of determining positions of beads, United States Patent, Patent Number 5048345 (in Japanese).

Cite This Article

Plain Text BibTeX RIS

APA Style

Aya Abe, Ichiro Hagiwara, Yang Yang, Chie Nara. (2022). Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. International Journal of Mechanical Engineering and Applications, 10(6), 144-159. https://doi.org/10.11648/j.ijmea.20221006.13

Copy | Download

ACS Style

Aya Abe; Ichiro Hagiwara; Yang Yang; Chie Nara. Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. Int. J. Mech. Eng. Appl. 2022, 10(6), 144-159. doi: 10.11648/j.ijmea.20221006.13

Copy | Download

AMA Style

Aya Abe, Ichiro Hagiwara, Yang Yang, Chie Nara. Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. Int J Mech Eng Appl. 2022;10(6):144-159. doi: 10.11648/j.ijmea.20221006.13

Copy | Download

@article{10.11648/j.ijmea.20221006.13,
  author = {Aya Abe and Ichiro Hagiwara and Yang Yang and Chie Nara},
  title = {Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {10},
  number = {6},
  pages = {144-159},
  doi = {10.11648/j.ijmea.20221006.13},
  url = {https://doi.org/10.11648/j.ijmea.20221006.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20221006.13},
  abstract = {Producing industrial goods with origami structure, such as cans or bottles which can be folded neatly after drinking up, is an idea anyone could easily think of. However, this idea has not been put in practical use yet. Recently, Tachi-Miura polyhedron (TMP) is gaining attention as a 3-dimensional version of Miura-Ori. Meanwhile, Nojima Polyhedron (NP) has been found to be similar as TMP and it is considered that both are able to be analyzed from the point of pairing origami structures proposed by Nojima. The pairing origami is generated by sticking the symmetry 2-dimensional parts to each other to create 3-dimensional shapes. In this study, NP and TMP are focused on and the possibility of the idea is examined. NP which is a mirror symmetry structure and TMP which is a glide symmetry structure, both can be folded not only in the axial but also in the radial direction, and so it would be convenient if they can be applied to beverage containers. In this study, whether both structures are rigid folding or not is investigated geometrically, and then how this gives influence on the energy absorbing characteristics is considered quantically. In the generation of the model, since NP is not rigid folding, a model with accurate coordinates cannot be established because deformation occurs on the surface at the folding stage, so the coordinates are determined by approximation. On the other hand, in the case of TMP, the coordinates of each point can be accurately indicated by parameters, so a model with accurate coordinates is established. Moreover, an engineering possibility to apply both structures in beverage containers is explored by studying their crushing characteristics on simulation. As a result, whether a rigid folding or not has some influence on its deformation mode, however it is shown that it has no influence on the purpose to investigate its possibility for industrialization. This is the first step to make sure the effective usages of the foldable pairing origami structure.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers
AU  - Aya Abe
AU  - Ichiro Hagiwara
AU  - Yang Yang
AU  - Chie Nara
Y1  - 2022/11/29
PY  - 2022
N1  - https://doi.org/10.11648/j.ijmea.20221006.13
DO  - 10.11648/j.ijmea.20221006.13
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 144
EP  - 159
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20221006.13
AB  - Producing industrial goods with origami structure, such as cans or bottles which can be folded neatly after drinking up, is an idea anyone could easily think of. However, this idea has not been put in practical use yet. Recently, Tachi-Miura polyhedron (TMP) is gaining attention as a 3-dimensional version of Miura-Ori. Meanwhile, Nojima Polyhedron (NP) has been found to be similar as TMP and it is considered that both are able to be analyzed from the point of pairing origami structures proposed by Nojima. The pairing origami is generated by sticking the symmetry 2-dimensional parts to each other to create 3-dimensional shapes. In this study, NP and TMP are focused on and the possibility of the idea is examined. NP which is a mirror symmetry structure and TMP which is a glide symmetry structure, both can be folded not only in the axial but also in the radial direction, and so it would be convenient if they can be applied to beverage containers. In this study, whether both structures are rigid folding or not is investigated geometrically, and then how this gives influence on the energy absorbing characteristics is considered quantically. In the generation of the model, since NP is not rigid folding, a model with accurate coordinates cannot be established because deformation occurs on the surface at the folding stage, so the coordinates are determined by approximation. On the other hand, in the case of TMP, the coordinates of each point can be accurately indicated by parameters, so a model with accurate coordinates is established. Moreover, an engineering possibility to apply both structures in beverage containers is explored by studying their crushing characteristics on simulation. As a result, whether a rigid folding or not has some influence on its deformation mode, however it is shown that it has no influence on the purpose to investigate its possibility for industrialization. This is the first step to make sure the effective usages of the foldable pairing origami structure.
VL  - 10
IS  - 6
ER  -

Copy | Download

Author Information

Aya Abe

Meiji Institute for Advanced Study of Mathematical Sciences, Meiji University, Tokyo, Japan
Ichiro Hagiwara

Meiji Institute for Advanced Study of Mathematical Sciences, Meiji University, Tokyo, Japan
Yang Yang

Meiji Institute for Advanced Study of Mathematical Sciences, Meiji University, Tokyo, Japan
Chie Nara

Meiji Institute for Advanced Study of Mathematical Sciences, Meiji University, Tokyo, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Aya Abe, Ichiro Hagiwara, Yang Yang, Chie Nara. (2022). Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. International Journal of Mechanical Engineering and Applications, 10(6), 144-159. https://doi.org/10.11648/j.ijmea.20221006.13

Copy | Download

ACS Style

Aya Abe; Ichiro Hagiwara; Yang Yang; Chie Nara. Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. Int. J. Mech. Eng. Appl. 2022, 10(6), 144-159. doi: 10.11648/j.ijmea.20221006.13

Copy | Download

AMA Style

Aya Abe, Ichiro Hagiwara, Yang Yang, Chie Nara. Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers. Int J Mech Eng Appl. 2022;10(6):144-159. doi: 10.11648/j.ijmea.20221006.13

Copy | Download

@article{10.11648/j.ijmea.20221006.13,
  author = {Aya Abe and Ichiro Hagiwara and Yang Yang and Chie Nara},
  title = {Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {10},
  number = {6},
  pages = {144-159},
  doi = {10.11648/j.ijmea.20221006.13},
  url = {https://doi.org/10.11648/j.ijmea.20221006.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20221006.13},
  abstract = {Producing industrial goods with origami structure, such as cans or bottles which can be folded neatly after drinking up, is an idea anyone could easily think of. However, this idea has not been put in practical use yet. Recently, Tachi-Miura polyhedron (TMP) is gaining attention as a 3-dimensional version of Miura-Ori. Meanwhile, Nojima Polyhedron (NP) has been found to be similar as TMP and it is considered that both are able to be analyzed from the point of pairing origami structures proposed by Nojima. The pairing origami is generated by sticking the symmetry 2-dimensional parts to each other to create 3-dimensional shapes. In this study, NP and TMP are focused on and the possibility of the idea is examined. NP which is a mirror symmetry structure and TMP which is a glide symmetry structure, both can be folded not only in the axial but also in the radial direction, and so it would be convenient if they can be applied to beverage containers. In this study, whether both structures are rigid folding or not is investigated geometrically, and then how this gives influence on the energy absorbing characteristics is considered quantically. In the generation of the model, since NP is not rigid folding, a model with accurate coordinates cannot be established because deformation occurs on the surface at the folding stage, so the coordinates are determined by approximation. On the other hand, in the case of TMP, the coordinates of each point can be accurately indicated by parameters, so a model with accurate coordinates is established. Moreover, an engineering possibility to apply both structures in beverage containers is explored by studying their crushing characteristics on simulation. As a result, whether a rigid folding or not has some influence on its deformation mode, however it is shown that it has no influence on the purpose to investigate its possibility for industrialization. This is the first step to make sure the effective usages of the foldable pairing origami structure.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers
AU  - Aya Abe
AU  - Ichiro Hagiwara
AU  - Yang Yang
AU  - Chie Nara
Y1  - 2022/11/29
PY  - 2022
N1  - https://doi.org/10.11648/j.ijmea.20221006.13
DO  - 10.11648/j.ijmea.20221006.13
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 144
EP  - 159
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20221006.13
AB  - Producing industrial goods with origami structure, such as cans or bottles which can be folded neatly after drinking up, is an idea anyone could easily think of. However, this idea has not been put in practical use yet. Recently, Tachi-Miura polyhedron (TMP) is gaining attention as a 3-dimensional version of Miura-Ori. Meanwhile, Nojima Polyhedron (NP) has been found to be similar as TMP and it is considered that both are able to be analyzed from the point of pairing origami structures proposed by Nojima. The pairing origami is generated by sticking the symmetry 2-dimensional parts to each other to create 3-dimensional shapes. In this study, NP and TMP are focused on and the possibility of the idea is examined. NP which is a mirror symmetry structure and TMP which is a glide symmetry structure, both can be folded not only in the axial but also in the radial direction, and so it would be convenient if they can be applied to beverage containers. In this study, whether both structures are rigid folding or not is investigated geometrically, and then how this gives influence on the energy absorbing characteristics is considered quantically. In the generation of the model, since NP is not rigid folding, a model with accurate coordinates cannot be established because deformation occurs on the surface at the folding stage, so the coordinates are determined by approximation. On the other hand, in the case of TMP, the coordinates of each point can be accurately indicated by parameters, so a model with accurate coordinates is established. Moreover, an engineering possibility to apply both structures in beverage containers is explored by studying their crushing characteristics on simulation. As a result, whether a rigid folding or not has some influence on its deformation mode, however it is shown that it has no influence on the purpose to investigate its possibility for industrialization. This is the first step to make sure the effective usages of the foldable pairing origami structure.
VL  - 10
IS  - 6
ER  -

Copy | Download