Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software

Funso K. Ariyo

doi:doi:10.11648/j.epes.20130201.11

| Peer-Reviewed

Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software

Funso K. Ariyo

Published in American Journal of Electrical Power and Energy Systems (Volume 2, Issue 1)

Published: 10 January 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The primary purpose in constructing equivalents is to represent a portion of a network containing many buses but having only a few "boundary buses" by a reduced network containing only the boundary buses and, perhaps, a few selected buses from within the original sub-network. The equivalent constructed gives an exact reproduction of the self and transfer impedances of the external system as seen from its boundary buses. PowerFactory’s network reduction algorithm produces an equivalent representation of the reduced part of the network and calculates its parameters. This equivalent re-presentation is valid for both load flow and short-circuit calculations, including asymmetrical faults (that is, single-phase faults).

Published in	American Journal of Electrical Power and Energy Systems (Volume 2, Issue 1)
DOI	10.11648/j.epes.20130201.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Boundary Buses, Reduced Network, Powerfactory, Load Flow, Short-Circuit Calculation

References

[1]	DIgSILENT PowerFactory Version 14.1 Tutorial, DIgSILENT GmbH Heinrich-Hertz-StraBe 9, 72810 Gomaringen, Germany, May, 2011.
[2]	Buygi M. O., H. M. Shanechi, G. Balzer, and M. Shahidehpour, Transmission Planning Approaches in Restructured Power Systems, IEEE Powertech, June 2006.
[3]	Ward J. B.. Equivalent circuits for power flow studies. AIEE Trans. Power App. Syst., 8:373-380, February 1949.
[4]	Singh H.K. and Srivastava S.C.. A sensitivity based network reduction technique for power transfer assessment in deregu-lated electricity environment. Transmission and Distribution Conference and Exhibition: Asia Pacific, IEEE/PES, October 2002.
[5]	Tinney W. F. and J. M. Bright, "Adaptive reductions for power flow equivalents," IEEE Trans. Power Syst., vol. 6, no. 2, pp. 613–621, May 1991.
[6]	Cheng X. and T. J. Overbye, "PTDF-based power system equivalents," IEEE Trans. Power Syst., vol. 20, no. 4, pp. 1868–1876, Nov. 2005.
[7]	Enns M. K. and J. J. Quada, "Sparsity-enhanced network re-duction forfault studies," IEEE Trans. Power Syst., vol. 6, no. 2, pp. 613–621, May 1991.
[8]	Saadat, H. ‘Power System Analysis’. McGraw- Hill Interna-tional Editions, 1999.
[9]	P.M. Anderson & A.A. Fouad, ‘Power System Control and Stability’, 2nd edition, IEEE Press Power Engineering Series, Wiley-Interscience, 2003.
[10]	Arthur R. Bergen & Vijay Vittal, ‘Power System Analysis’, 2nd edition, Prentice Hall, Inc., 2000.
[11]	Yao-nan Yu, ‘Electric Power System Dynamics’, Academic Press, Inc., 1983.
[12]	www.sciencedirect.com
[13]	Hyungseon Oh, ‘A New Network Reduction Methodology for Power System Planning Studies’, IEEE Transactions on Power Systems, Vol. 25, No. 2, May 2010.

Cite This Article

Plain Text BibTeX RIS

APA Style

Funso K. Ariyo. (2013). Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. American Journal of Electrical Power and Energy Systems, 2(1), 1-6. https://doi.org/10.11648/j.epes.20130201.11

Copy | Download

ACS Style

Funso K. Ariyo. Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. Am. J. Electr. Power Energy Syst. 2013, 2(1), 1-6. doi: 10.11648/j.epes.20130201.11

Copy | Download

AMA Style

Funso K. Ariyo. Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. Am J Electr Power Energy Syst. 2013;2(1):1-6. doi: 10.11648/j.epes.20130201.11

Copy | Download

@article{10.11648/j.epes.20130201.11,
  author = {Funso K. Ariyo},
  title = {Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {2},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.epes.20130201.11},
  url = {https://doi.org/10.11648/j.epes.20130201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20130201.11},
  abstract = {The primary purpose in constructing equivalents is to represent a portion of a network containing many buses but having only a few "boundary buses" by a reduced network containing only the boundary buses and, perhaps, a few selected buses from within the original sub-network. The equivalent constructed gives an exact reproduction of the self and transfer impedances of the external system as seen from its boundary buses. PowerFactory’s network reduction algorithm produces an equivalent representation of the reduced part of the network and calculates its parameters. This equivalent re-presentation is valid for both load flow and short-circuit calculations, including asymmetrical faults (that is, single-phase faults).},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software
AU  - Funso K. Ariyo
Y1  - 2013/01/10
PY  - 2013
N1  - https://doi.org/10.11648/j.epes.20130201.11
DO  - 10.11648/j.epes.20130201.11
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20130201.11
AB  - The primary purpose in constructing equivalents is to represent a portion of a network containing many buses but having only a few "boundary buses" by a reduced network containing only the boundary buses and, perhaps, a few selected buses from within the original sub-network. The equivalent constructed gives an exact reproduction of the self and transfer impedances of the external system as seen from its boundary buses. PowerFactory’s network reduction algorithm produces an equivalent representation of the reduced part of the network and calculates its parameters. This equivalent re-presentation is valid for both load flow and short-circuit calculations, including asymmetrical faults (that is, single-phase faults).
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Funso K. Ariyo

Department of Electronic and Electrical Engineering, Ile-Ife, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Funso K. Ariyo. (2013). Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. American Journal of Electrical Power and Energy Systems, 2(1), 1-6. https://doi.org/10.11648/j.epes.20130201.11

Copy | Download

ACS Style

Funso K. Ariyo. Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. Am. J. Electr. Power Energy Syst. 2013, 2(1), 1-6. doi: 10.11648/j.epes.20130201.11

Copy | Download

AMA Style

Funso K. Ariyo. Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software. Am J Electr Power Energy Syst. 2013;2(1):1-6. doi: 10.11648/j.epes.20130201.11

Copy | Download

@article{10.11648/j.epes.20130201.11,
  author = {Funso K. Ariyo},
  title = {Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software},
  journal = {American Journal of Electrical Power and Energy Systems},
  volume = {2},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.epes.20130201.11},
  url = {https://doi.org/10.11648/j.epes.20130201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20130201.11},
  abstract = {The primary purpose in constructing equivalents is to represent a portion of a network containing many buses but having only a few "boundary buses" by a reduced network containing only the boundary buses and, perhaps, a few selected buses from within the original sub-network. The equivalent constructed gives an exact reproduction of the self and transfer impedances of the external system as seen from its boundary buses. PowerFactory’s network reduction algorithm produces an equivalent representation of the reduced part of the network and calculates its parameters. This equivalent re-presentation is valid for both load flow and short-circuit calculations, including asymmetrical faults (that is, single-phase faults).},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Electrical Network Reduction for Load Flow and Short-Circuit Calculations Using Power Factory Software
AU  - Funso K. Ariyo
Y1  - 2013/01/10
PY  - 2013
N1  - https://doi.org/10.11648/j.epes.20130201.11
DO  - 10.11648/j.epes.20130201.11
T2  - American Journal of Electrical Power and Energy Systems
JF  - American Journal of Electrical Power and Energy Systems
JO  - American Journal of Electrical Power and Energy Systems
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2326-9200
UR  - https://doi.org/10.11648/j.epes.20130201.11
AB  - The primary purpose in constructing equivalents is to represent a portion of a network containing many buses but having only a few "boundary buses" by a reduced network containing only the boundary buses and, perhaps, a few selected buses from within the original sub-network. The equivalent constructed gives an exact reproduction of the self and transfer impedances of the external system as seen from its boundary buses. PowerFactory’s network reduction algorithm produces an equivalent representation of the reduced part of the network and calculates its parameters. This equivalent re-presentation is valid for both load flow and short-circuit calculations, including asymmetrical faults (that is, single-phase faults).
VL  - 2
IS  - 1
ER  -

Copy | Download